I wanted to change some settings in the BIOS, but I have never used BIOS before, so I decided to install Touch BIOS, since it seemed more beginner friendly. Then If your exist then flash the bios again with Q-flash. If you have gigabyte user's manual, you can see there and take any precaution. Although, one thing I'm worried about is that I actually tried using Q Flash last night and my computer doesn't seem to be reading any drives. So after installing it with @BIOS, it prompted me to restart. It is easy and you just need a usb flash drive to copy new bios. To remove the battery from your mobo, first unplug power cord from case and remove your gpu if needed. You have to download bios file from gigabyte website. But hopefully this will be fixed after the CMOS reset. I flash my gigabyte bios with Q-Flash from usb drive without having any problem. While it restarted, I held down Delete to bring up the BIOS, but it was the plain, non-GUI BIOS that was installed before. If you have gigabyte user's manual, you can see there and take any precaution. But I have a question: How do I know if I properly reset the CMOS? Is there something I should do in the BIOS, like changing some sort of setting that's messing things up? Check if your usb drive using FAT32/16/12 file system. So I exited, expecting the install to finalize after booting. And do I need to remove the battery, since I don't feel like removing my GPU to access it, and also, I'm terrified of Electrostatic discharge. To remove the battery from your mobo, first unplug power cord from case and remove your gpu if needed. You have to download bios file from gigabyte website. Because after my two attempts before, my computer booted with a POST error, then continued to the blue screen. Then the screen that said Touch BIOS and all the keys to press for different boot options flashed on the screen, but it then continued to boot into Windows. So I just removed the battery for about 45 seconds. Then, as the animation with the four orbs that join to form the Windows logo started, a blue screen appeared with an error message that Windows couldn't boot.
Also, if someone could explain what caused this, that would be great too. My motherboard: Gigabyte GA-Z68A-D3H-B3 There will be a beep sound on startup. Use safe mode to log on windows and see what happen. If there is any problem in your bios then try reset it by removing battery. It is easy and you just need a usb flash drive to copy new bios. And no, I didn't have any problems with Windows before. So I just removed the battery for about 45 seconds. Then If your exist then flash the bios again with Q-flash. I actually already tried this, but I think I didn't keep out the battery long enough. And make sure the BIOS update file matches your motherboard revision (e.g. Also you must extract bios file to usb flash drive. So I have tried a few different things to try and solve the problem, such as loading default and fail safe BIOS settings, touching the CMOS jumper together with a screwdriver, and restoring from a system restore point before installing @BIOS. Use safe mode to log on windows and see what happen. If there is any problem in your bios then try reset it by removing battery. The CMOS jumper thing may not have worked, since I only used a screwdriver, but I really don't feel like removing the battery, since on my motherboard, it's behind the video card.
While some EFI BIOS try to address this with a mouse friendly environment, many implementations still lack a certain ease-of-use necessary for most people.